HP MSM3xx User Manual

Working with VSCs
VSC configuration options
4-19
MAC-based authentication
This option enables wireless users to be authenticated by their MAC addresses.
Authentication must occur via an external device. If Use HP MSM Controller is enabled
under General, this must be an HP MSM Controller. Otherwise a third-party RADIUS server
can be used.
For a complete description of all options, see the online help.
Location-aware
This feature enables you to control logins to the public access network based on the AP, or
group of APs, to which a user is connected. It is only available when Use HP MSM
controller is enabled under General.
For each user login, location-aware sends the PHY Type, SSID, and VLAN to the controller. It
also includes the specified Group name.
MAC filter
When enabled, this option enables you to control access to the AP based on the MAC address
of client stations. You can either block access or allow access, depending on your
requirements. Up to 64 MAC addresses are supported per VSC.
MAC-based authentication options supported when the
Use HP MSM Controller option is ...
Enabled Disabled

HP MSM3xx Specifications

General

Brand	HP
Model	MSM3xx
Category	Wireless Access Point
Language	English