Introduction
New in this release
1-4
Commands and program listings
Monospaced text identifies commands and program listings as follows:
New in this release
The following new features and enhancements have been added in release 5.5:
Example Description
use-access-list
Command name. Specify it as shown.
ip_address
Items in italics are parameters for which you must supply
a value.
ssl-certificate=URL [%s]
Items enclosed in square brackets are optional. You can
either include them or not. Do not include the brackets.
In this example you can either include the “%s” or omit it.
[ONE | TWO]
Items separated by a vertical line indicate a choice.
Specify only one of the items. Do not include the vertical
line.
New feature or enhancement For information see...
New access points This release supports the following new 802.11n
dual-radio access points: E-MSM430, E-MSM460,
and E-MSM466. For for more information on these
APs, see:
E-MSM430, E-MSM460, and E-MSM466
802.11n Access Points Quickstart
Radio configuration on page 3-8
802.11n MIMO antennas for the E-MSM466
on page C-2
Broadcast filtering Broadcast filtering on page 4-10
Band steering Band steering on page 4-10
Beamforming Tx beamforming on page 3-28
Transmission protection Tx protection on page 3-29
Identify RADIUS server by host name Primary/Secondary RADIUS server on page 6-5
LEAP support This release supports LEAP (with WEP, TKIP, or
WPA2 keys) when using an external RADIUS
server to validate user login credentials. Support is
automatic. No configuration is required.
To Next Page
Loading...
Need help?
General
