Working with VSCs
VSC configuration options
4-12
Generally, most users will be involved in the bidirectional exchange of unicast packets. In
this case, the rules can be simplified by assuming that the most restrictive setting for this
option takes precedence. For example:
If VSC1 is set to No and VSC2 is set to All, no communication is permitted between users
on the two VSCs, or between users on VSC1. However, all users on VSC2 can
communicate with each other.
If VSC1 is set to 802.1X and VSC2 set to All, only 802.1X users can communicate
between the two VSCs.
Quality of service
The quality of service (QoS) feature provides a number of different mechanisms to prioritize
wireless traffic sent to wireless client stations. For detailed information, see Quality of
service (QoS) on page 4-23.
To Next Page
Loading...
Need help?
General
