Security
Using an external RADIUS server
6-11
Vendor-specific (Colubris-AVPair SSID): SSID that the customer is associated with.
The HP Colubris-AVPair attribute conforms to RADIUS RFC 2865. You may need to define
this attribute on your RADIUS server (if it is not already present) using the following
values:
SMI network management private enterprise code = 8744
Vendor-specific attribute type number = 0
Attribute type: A string in the following format <keyword>=<value>
Configuring administrative accounts on a RADIUS
server
This section presents all RADIUS attributes that are supported for administrator (manager/
operator) accounts.
Note Only Access Request packets are supported for administrative accounts. Access Accept,
Access Reject, Access Challenge, Accounting Request, and Accounting Response requests
are not supported.
Access Request attributes
The following are supported Access Request RADIUS attributes.
User-Name (string): The username assigned to the user or a device when using MAC
authentication.
NAS-Identifier (string): The NAS ID set on the Security > RADIUS page for the profile
being used.
Service-Type (32-bit unsigned integer): As defined in RFC 2865. Set as follows:
Web Admin is SERVICE_TYPE_ADMINISTRATIVE
Framed-MTU (32-bit unsigned integer): Hard-coded value of 1496.
MSCHAP-Challenge (string): As defined in RFC 2433. Only present when the
authentication scheme on the Security > RADIUS page is set to MSCHAPv1 or
MSCHAPv2. Length = 8 bytes.
MSCHAP-Response (string): As defined in RFC 2433. Only present when the
authentication scheme on the Security > RADIUS page is set to MSCHAPv1. Length =
49 bytes.
Vendor-specific (Colubris-AVPair Administrative role): Administrative role
assigned to the user, either manager or operator.
The Colubris-AVPair attribute conforms to RADIUS RFC 2865. You may need to define
this attribute on your RADIUS server (if it is not already present) using the following
values:
SMI network management private enterprise code = 8744
To Next Page
Loading...
Need help?
General
