Introduction
About this guide
1-2
About this guide
This guide explains how to install, configure, and operate HP MSM3xx/MSM4xx Access
Points in autonomous mode. Basic information on operating in controlled mode is also
provided. For detailed controlled-mode instructions, see the MSM7xx Controllers
Management and Configuration Guide.
Products covered
This guide provides autonomous-mode information for the following MSM3xx and MSM4xx
Access Points (“WW” identifies worldwide versions for the rest of the world):
The product models in the table immediately above include alternative product names in
parenthesis. For example, the MSM422 is also known as the E-MSM422. Both names refer to
the same product. Except for E-MSM430, E-MSM460, and E-MSM466, the original MSM
product names (without “E-”) are used throughout this document.
Model WW Americas Japan Israel
E-MSM430 J9651A J9650A J9652A J9653A
E-MSM460 J9591A J9590A J9589A J9618A
E-MSM466 J9622A J9621A J9620A
Model WW USA Japan
MSM310 (E-MSM310) J9379A/B J9374A/B J9524A/B
MSM310-R (E-MSM310-R) J9383A/B J9380A/B
MSM320 (E-MSM320) J9364A/B J9360A/B J9527A/B
MSM320-R (E-MSM320-R) J9368A/B J9365A/B J9528A/B
MSM325 (E-MSM325) J9373A/B J9369A/B
MSM335 (E-MSM335) J9357A/B J9356A/B
MSM410 (E-MSM410) J9427A/B J9426A/B J9529A/B
MSM422 (E-MSM422) J9359A/B J9358A/B J9530A/B