Security
Using an external RADIUS server
6-6
Descriptions
Acct-Session-Id (32-bit unsigned integer): A unique accounting ID used to make it easy
to match up records in a log file.
Called-Station-Id (string): BSSID of the VSC used by a wireless client, or the MAC
address of the LAN port used by a wired client. By default, the MAC address is sent in
IEEE format. For example: 00-02-03-5E-32-1A. The format can be changed under
Wireless protection on the VSC > Profiles page.
Calling-Station-Id (string): The MAC address of the 802.1X client station. By default,
the MAC address is sent in IEEE format. For example: 00-02-03-5E-32-1A. The format can
be changed under Wireless protection on the VSC > Profiles page.
Framed-MTU (32-bit unsigned integer): Hard-coded value of 1496.
Message-Authenticator (string): As defined in RFC 2869. Always present even when
not doing an EAP authentication. Length = 16 bytes.
NAS-Identifier (string): The NAS ID set on the Security > RADIUS page for the
RADIUS profile being used.
NAS-Ip-Address (32-bit unsigned integer): The IP address of the port the AP is using to
communicate with the RADIUS server.
NAS-Port (32-bit unsigned integer): A virtual port number starting at 1. Assigned by the
AP.
NAS-Port-Type (32-bit unsigned integer): Always set to 19, which represents
WIRELESS_802_11.
Service-Type (32-bit unsigned integer): Set to LOGIN_USER.
State (string): As defined in RFC 2865.
User-Name (string): The username assigned to the user. Or if MAC-authentication is
enabled, the MAC address of the wireless client station.
The following attributes are mutually exclusive depending on the RADIUS authentication
method.
User-Password (string): The password supplied by a user or device when logging in.
Encoded as defined in RFC 2865. Only present when the authentication method for the
RADIUS profile is set to PAP. Or, if MAC-authentication is enabled, this attribute contains
the MAC address of the wireless client station.
EAP-Message (string): As defined in RFC 2869. Only present when the authentication
method for the RADIUS profile is set to EAP-MD5.
Vendor-specific (Colubris-AVPair SSID): SSID that the customer is associated with.
The Colubris-AVPair attribute conforms to RADIUS RFC 2865. You may need to define
this attribute on your RADIUS server (if it is not already present) using the following
values:
SMI network management private enterprise code = 8744
To Next Page
Loading...
