Connecting external antennas
Radio power-level setting example
C-6
7. To the left of dBm, specify the value, 15 in this example. The dialog box should now look
similar to this (in this screenshot the tall dialog box is split in two):
8. Select Save.
Additional information is available as follows:
For autonomous access points, see Transmit power control on page 3-31.
For controlled access points, see Transmit power control in the MSM7xx Controllers
Management and Configuration Guide.
Documentation is available online from: www.hp.com/networking/support. For Product
Brand, select ProCurve.
To Next Page
Loading...
