HP MSR4080 User Manual

136
PSE Software Version : 200
PSE Hardware Version : 100
Legacy PD Detection : Disabled
Power Utilization Threshold : 80
PSE Power Policy : Disabled
PD Power Policy : Disabled
PD Disconnect-Detection Mode : DC
# (Distributed devices in IRF mode.) Display detailed information about PSE 7.
<Sysname> display poe pse 7
PSE ID : 7
Chassis : 1
Slot No. : 2
SSlot No. : 0
PSE Model : LSBMPOEGV48TP
PSE Status : Disabled
PSE Preempted : No
Power Priority : Low
Current Power : 0 W
Average Power : 0 W
Peak Power : 0 W
Max Power : 200 W
Remaining Guaranteed Power : 200 W
PSE CPLD Version : 100
PSE Software Version : 200
PSE Hardware Version : 100
Legacy PD Detection : Disabled
Power Utilization Threshold : 80
PSE Power Policy : Disabled
PD Power Policy : Disabled
PD Disconnect Detection Mode : DC
Table 26 Command output
Field Description
PSE ID ID of the PSE.
Slot No. Slot number of the PSE.
SSlot No. Subslot number of the PSE.
Chassis In IRF mode, member ID of the device where the PSE resides.
PSE Status
PoE status of the PSE:
• Enabled.
• Disabled.
Preempted
Power preemption status for the PSE:
• No—The system has sufficient power for the PSE.
• Yes—The system has supplied power to other PSEs and does not have
sufficient power for this PSE.
Power Priority Power priority of the PSE.

HP MSR4080 Specifications

General

Brand	HP
Model	MSR4080
Category	Network Router
Language	English