HP MSR4080

155
[Sysname-poe-profile-def-1]
Related commands
• apply poe-profile
• poe enable
• poe max-power
• poe priority
poe utilization-threshold
Use poe utilization-threshold to configure a power alarm threshold for a PSE.
Use undo poe utilization-threshold to restore the default.
Syntax
poe utilization-threshold value pse pse-id
undo poe utilization-threshold pse pse-id
Default
The power alarm threshold for the PSE is 80%.
Views
System view
Predefined user roles
network-admin
Parameters
value: Specifies alarm threshold as a percentage of 1 to 99.
pse pse-id: Specifies a PSE by its ID.
Usage guidelines
If PSE power utilization crosses the threshold multiple times in succession, the system sends notification
messages only for the first crossing. For more information, see "Configuring SNMP."
Examples
# Set the power alarm threshold of PSE 7 to 90%.
<Sysname> system-view
[Sysname] poe utilization-threshold 90 pse 7