HP MSR4080

420
# (Distributed devices in IRF mode.) Display the state and log information of the log buffer.
<Sysname> display logbuffer chassis 0 slot 1
Log buffer: Enabled
Max buffer size: 1024
Actual buffer size: 512
Dropped messages: 0
Overwritten messages: 0
Current messages: 127
%Jun 19 18:03:24:55 2006 Sysname SYSLOG/7/SYS_RESTART:System restarted
…
Table 88 Command output
Field Descri
p
tion
Log buffer
• Enabled—Logs can be output to the log buffer.
• Disabled—Logs cannot be output to the buffer.
Max buffer size Maximum buffer size supported by the device.
Actual buffer size
Maximum buffer size configured by using the
info-center logbuffer size command.
Dropped messages Number of dropped messages.
Overwritten messages Number of overwritten messages.
Current messages Number of current messages.
Related commands
• info-center logbuffer
• reset logbuffer
display logbuffer summary
Use display logbuffer summary to display the summary of the log buffer.
Syntax
Centralized devices in standalone mode:
display logbuffer summary [ level severity ]
Distributed devices in standalone mode/centralized devices in IRF mode:
display logbuffer summary [ level severity | slot slot-number ] *
Distributed devices in IRF mode:
display logbuffer summary [ level severity | chassis chassis-number slot slot-number ] *
Views
Any view
Predefined user roles
network-admin
network-operator