HP MSR4080 User Manual

409
Field Descri
p
tion
Port sFlow collector port.
Aging
Remaining lifetime of the sFlow collector. If this field displays N/A, the sFlow
collector never ages out.
Size Maximum length of the sFlow data portion in an sFlow packet.
VPN-instance Name of the VPN bound with the sFlow collector.
Description Description of the sFlow collector.
Port information Information about interfaces configured with sFlow.
Interface Interface configured with sFlow.
CID
ID of the sFlow collector, for receiving counter sampled packets. If no sFlow
collector ID is specified, this field displays 0.
Interval(s) Counter sampling interval, in seconds.
FID
ID of the sFlow collector for receiving flow sampled packets. If no sFlow collector
ID is specified, this field displays 0.
MaxHLen
Maximum number of bytes that can be copied in a sampled packet (starting from
the packet header).
Rate
Number of packets out of which the interface samples a packet by using flow
sampling.
Mode
Flow sampling mode:
• Determine—Samples a fixed number of packets.
• Random—Samples a random number of packets.
Status
sFlow status of the port:
• Suspended—The sFlow feature is suspended because the port is down.
• Active—The sFlow feature is active because the port is up.
sflow agent
Use sflow agent to configure an IP address for the sFlow agent.
Use undo sflow agent to restore the default.
Syntax
sflow agent { ip ip-address | ipv6 ipv6-address }
undo sflow agent { ip | ipv6 }
Default
No IP address is configured for the sFlow agent. The device periodically identifies whether the sFlow
agent has an IP address. If it does not, the device automatically selects an IPv4 address for the sFlow
agent. It does not save the IPv4 address in the configuration file.
Views
System view
Predefined user roles
network-admin

HP MSR4080 Specifications

General

Brand	HP
Model	MSR4080
Category	Network Router
Language	English