HP MSR4080

430
[Sysname] undo info-center logbuffer size
Related commands
• display logbuffer
• info-center enable
info-center logfile enable
Use info-center logfile enable to enable the log file feature.
Use undo info-center logfile enable to disable the log file feature.
Syntax
info-center logfile enable
undo info-center logfile enable
Default
The log file feature is enabled.
Views
System view
Predefined user roles
network-admin
Examples
# Enable log output to a log file.
<Sysname> system-view
[Sysname] info-center logfile enable
info-center logfile frequency
Use info-center logfile frequency to configure the interval for saving logs to a log file.
Use undo info-center logfile frequency to restore the default saving interval.
Syntax
info-center logfile frequency freq-sec
undo info-center logfile frequency
Default
The log file saving interval is 86400 seconds.
Views
System view
Predefined user roles
network-admin
Parameters
freq-sec: Specifies the interval (in seconds) at which the system saves logs to a log file. The value range
is 1 to 86400.