HP MSR4080 User Manual

158
Related commands
• snmp-agent community
• snmp-agent usm-user { v1 | v2c }
display snmp-agent context
Use display snmp-agent context to display an SNMP context.
Syntax
display snmp-agent context [ context-name ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
context-name: Specifies an SNMP context by its name, a case-sensitive string of 1 to 32 characters. If no
SNMP context is specified, this command displays all SNMP contexts created on the device.
Examples
# Display all SNMP contexts created on the device.
<Sysname> display snmp-agent context
trillcontext
isiscontext
Related commands
snmp-agent context
display snmp-agent group
Use display snmp-agent group to display SNMP group information, including the group name, security
model, MIB view, and storage-type.
Syntax
display snmp-agent group [ group-name ]
Views
Any view
Predefined user roles
network-admin
network-operator

HP MSR4080 Specifications

General

Brand	HP
Model	MSR4080
Category	Network Router
Language	English