208
Related commands
rmon alarm
display rmon event
Use display rmon event to display RMON event entries.
Syntax
display rmon event [ entry-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
entry-number: Specifies an event entry index in the range of 1 to 65535. If you do not specify an entry,
the command displays all event entries.
Usage guidelines
An event entry includes the following information:
• Event index.
• Event owner.
• Event description.
• Action triggered by the event (such as logging the event or sending an SNMP notification).
• Last time when the event occurred (seconds that elapsed since the system startup).
Examples
# Display all RMON event entries.
<Sysname> display rmon event
EventEntry 1 owned by user1 is VALID.
Description: N/A
Community: Security
Take the action log-trap when triggered, last triggered at 0days 00h:02m:27s uptime.
To Next Page
Loading...
Need help?
General
