EasyManua.ls Logo

HP MSR4080

HP MSR4080
471 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
419
Severity
value
Level Description
Corresponding
keyword in
commands
3 Error
Error condition. For example, the link state changes or a
storage card is unplugged.
error
4 Warning
Warning condition. For example, an interface is
disconnected, or the memory resources are used up.
warning
5 Notification
Normal but significant condition. For example, a terminal
logs in to the device, or the device reboots.
notification
6 Informational
Informational message. For example, a command or a
ping operation is executed.
informational
7 Debugging Debugging message. debugging
size buffersize: Specifies the number of latest logs to be displayed. The value range is 1 to 1024. If you
do not specify this option, the command displays all logs in the log buffer.
slot slot-number: Specifies a card by its slot number. If you do not specify a card, this command displays
information for all cards. (Distributed devices in standalone mode.)
slot slot-number: Specifies an IRF member device by its member ID. If you do not specify a member
device, this command displays information for all member devices. (Centralized devices in IRF mode.)
chassis chassis-number slot slot-number: Specifies a card on an IRF member device. The chassis-number
argument represents the member ID of the IRF member device. The slot-number argument represents the
slot number of the card. If you do not specify a card, this command displays information for all cards.
(Distributed devices in IRF mode.)
Examples
# (Centralized devices in standalone mode.) Display the state and log information of the log buffer.
<Sysname> display logbuffer
Log buffer: Enabled
Max buffer size: 1024
Actual buffer size: 512
Dropped messages: 0
Overwritten messages: 718
Current messages: 512
%Jun 17 15:57:09:578 2006 Sysname SYSLOG/7/SYS_RESTART:System restarted --
# (Distributed devices in standalone mode/centralized devices in IRF mode.) Display the state and log
information of the log buffer.
<Sysname> display logbuffer slot 1
Log buffer: Enabled
Max buffer size: 1024
Actual buffer size: 512
Dropped messages: 0
Overwritten messages: 0
Current messages: 127
%Jun 19 18:03:24:55 2006 Sysname SYSLOG /7/SYS_RESTART:System restarted

Table of Contents

Other manuals for HP MSR4080

Related product manuals