HP MSR4080

161
Examples
# Display SNMP MIB node information.
<Sysname> display snmp-agent mib-node
iso<1>(NA)
|-std<1.0>(NA)
|-iso8802<1.0.8802>(NA)
|-ieee802dot1<1.0.8802.1>(NA)
|-ieee802dot1mibs<1.0.8802.1.1>(NA)
|-lldpMIB<1.0.8802.1.1.2>(NA)
|-lldpNotifications<1.0.8802.1.1.2.0>(NA)
|-lldpNotificationPrefix<1.0.8802.1.1.2.0.0>(NA)
|-lldpRemTablesChange<1.0.8802.1.1.2.0.0.1>(NA)
|-lldpObjects<1.0.8802.1.1.2.1>(NA)
|-lldpConfiguration<1.0.8802.1.1.2.1.1>(NA)
|-*lldpMessageTxInterval<1.0.8802.1.1.2.1.1.1>(RW)
|-*lldpMessageTxHoldMultiplier<1.0.8802.1.1.2.1.1.2>(RW)
|-*lldpReinitDelay<1.0.8802.1.1.2.1.1.3>(RW)
Table 33 Command output
Field
Descri
p
tion
-std MIB node name.
<1.0> OID of a MIB node.
(NA)
Permissions to MIB nodes:
• NA—Not accessible.
• NF—Supports notifications.
• RO—Supports read-only access.
• RW—Supports read and write access.
• RC—Supports read-write-create access.
• WO—Supports write-only access.
* Leaf node or MIB table node.
# Display detailed MIB node information.
<Sysname> display snmp-agent mib-node details
iso(1)(lldpMessageTxInterval)
|-std(0)(lldpMessageTxInterval)
|-iso8802(8802)(lldpMessageTxInterval)
|-ieee802dot1(1)(lldpMessageTxInterval)
|-ieee802dot1mibs(1)(lldpMessageTxInterval)
|-lldpMIB(2)(lldpMessageTxInterval)
|-lldpNotifications(0)(lldpMessageTxInterval)
|-lldpNotificationPrefix(0)(lldpMessageTxInterval)
|-lldpRemTablesChange(1)(NULL)
|-lldpObjects(1)(lldpMessageTxInterval)
|-lldpConfiguration(1)(lldpMessageTxInterval)
|-*lldpMessageTxInterval(1)(lldpMessageTxHoldMultiplier)
|-*lldpMessageTxHoldMultiplier(2)(lldpReinitDelay)
|-*lldpReinitDelay(3)(lldpTxDelay)