HP MSR4080 User Manual

173
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
engineid engineid: Displays SNMPv3 user information for the SNMP engine ID identified by engineid.
When an SNMPv3 user is created, the system records the local SNMP entity engine ID. The user
becomes invalid when the engine ID changes, and it becomes valid again when the recorded engine ID
is restored.
group group-name: Displays SNMPv3 user information for a specified SNMP group name. The group
name is case sensitive.
username user-name: Displays information about the specified SNMPv3 user. The username is case
sensitive.
Usage guidelines
This command displays only SNMPv3 users that you have created by using the snmp-agent usm-user v3
command. To display SNMPv1 or SNMPv2c users created by using the snmp-agent usm-user { v1 | v2c }
command, use the display snmp-agent community command.
Examples
# Display information about all SNMPv3 users.
<Sysname> display snmp-agent usm-user
Username: userv3
Group name: mygroupv3
Engine ID: 800063A203000FE240A1A6
Storage type: nonVolatile
User status: active
ACL: 2000
Username: userv3
Group name: mygroupv3
Engine ID: 8000259503000BB3100A508
Storage type: nonVolatile
User status: active
ACL name: testacl
Username: userv3code
Role name: groupv3code
network-operator
Engine ID: 800063A203000FE240A1A6
Storage type: nonVolatile
User status: active
Username: userv3code
Role name: snmprole
network-operator

HP MSR4080 Specifications

General

Brand	HP
Model	MSR4080
Category	Network Router
Language	English