HP MSR4080 User Manual

178
Parameters
read: Assigns the specified community read-only access to MIB objects. A read-only community can only
inquire MIB information.
write: Assigns the specified community read and write access to MIB objects. A read and write
community can configure MIB information.
simple: Sets a community name in plain text and saves the community name in cipher text. If you do not
specify this keyword, the community name is set and saved in plain text.
cipher: Sets and saves a community name in cipher text. If you do not specify this keyword, the
community name is set and saved in plain text.
community-name: Sets a case-sensitive community name. In plain text, the community name must be a
string of 1 to 32 characters. In cipher text, the community name must be a string of 33 to 73 characters.
Input a string as escape characters after a backslash (\).
mib-view view-name: Specifies the MIB view available for the community. The view-name argument
represents a MIB view name, a string of 1 to 32 characters. A MIB view represents a set of accessible
MIB objects. If no MIB view is specified, the specified community can access the MIB objects in the
default MIB view ViewDefault.
user-role role-name: Specifies a user role name for the community, a case-sensitive string of 1 to 63
characters.
acl acl-number: Specifies a basic IPv4 ACL by its number to filter NMSs by source IPv4 address. The
acl-number argument represents an ACL number in the range of 2000 to 2999. In the specified
community, only NMSs with an IPv4 address permitted in the ACL can access the SNMP agent. If no ACL
is specified, or the specified ACL does not exist, all NMSs in the SNMP community can access the SNMP
agent. If the specified ACL does not have any rules, no NMS in the SNMP community can access the
SNMP agent. For more information about ACL, see ACL and QoS Configuration Guide.
name acl-name: Specifies a basic IPv4 ACL by its name to filter NMSs by source IPv4 address. The
acl-name argument represents an ACL name, a case-insensitive string of 1 to 63 characters. In the
specified community, only NMSs with an IPv4 address permitted in the ACL can access the SNMP agent.
If no ACL is specified, or the specified ACL does not exist, all NMSs in the SNMP community can access
the SNMP agent. If the specified ACL does not have any rules, no NMS in the SNMP community can
access the SNMP agent. For more information about ACL, see ACL and QoS Configuration Guide.
acl ipv6 ipv6-acl-number: Specifies a basic IPv6 ACL by its name to filter NMSs by source IPv6 address.
The ipv6-acl-number argument represents an ACL number in the range of 2000 to 2999. In the specified
community, only NMSs with an IPv6 address permitted in the IPv6 ACL can access the SNMP agent. If
no ACL is specified, or the specified ACL does not exist, all NMSs in the SNMP community can access
the SNMP agent. If the specified ACL does not have any rules, no NMS in the SNMP community can
access the SNMP agent.
name ipv6-acl-name: Specifies a basic IPv6 ACL by its number to filter NMSs by source IPv6 address.
The ipv6-acl-name argument represents an ACL name, a case-insensitive string of 1 to 63 characters. In
the specified community, only NMSs with an IPv6 address permitted in the ACL can access the SNMP
agent. If no ACL is specified, or the specified ACL does not exist, all NMSs in the SNMP community can
access the SNMP agent. If the specified ACL does not have any rules, no NMS in the SNMP community
can access the SNMP agent. For more information about ACL, see ACL and QoS Configuration Guide.
Usage guidelines
This command is for SNMPv1 and SNMPv2c, and is not supported in FIPS mode.

HP MSR4080 Specifications

General

Brand	HP
Model	MSR4080
Category	Network Router
Language	English