HP MSR4080 User Manual

293
registered: Displays policies that have been created.
policy-name: Specifies a policy by its name. If you do not specify a policy, the command displays all
monitor policies that are running or have been created.
verbose: Displays detailed information about monitor policies.
Examples
# Display all running monitor policies.
<Sysname> display rtm policy active
JID Type Event TimeActive PolicyName
507 TCL INTERFACE Aug 29 14:55:55 2013 test
# Display all monitor policies that have been created.
<Sysname> display rtm policy registered
Total number: 1
Type Event TimeRegistered PolicyName
CLI Aug 29 14:54:50 2013 test
# Display detailed information about all monitor policies.
<Sysname> display rtm policy registered verbose
Total number: 1
Policy Name: test
Policy Type: CLI
Event Type:
TimeRegistered: Aug 29 14:54:50 2013
User-role: network-operator
network-admin
Table 60 Command output
Field Descri
p
tion
JID Job ID. This field is available for the display rtm policy active command.
PolicyName Monitor policy name.
Type
Policy Type
Policy creation method:
• TCL—The policy was configured by using Tcl.
• CLI—The policy was configured from the CLI.
Event
Event Type
Source of the event specified in the policy.
Options include CLI, HOTPLUG, INTERFACE, PROCESS, SNMP, SNMP_NOTIF, and
SYSLOG.
TimeActive Time when the policy started to execute.
TimeRegistered Time when the policy was created.
Total number Total number of policies.
User-role
User roles for executing the monitor policy. To execute the monitor policy, an
administrator must have at least one of the displayed user roles.

HP MSR4080 Specifications

General

Brand	HP
Model	MSR4080
Category	Network Router
Language	English