HP MSR4080

343
1 1 120 S 17 1092K 00:00:23 3.98% scmd
1027 1027 120 S 12 9280K 00:01:13 1.44% devd
1000 1000 115 S 0 0K 00:00:09 0.36% [sock/1]
1009 1009 115 S 0 0K 00:00:09 0.36% [karp/1]
4 4 115 S 0 0K 00:00:06 0.18% [ksoftirqd/0]
1010 1010 115 S 0 0K 00:00:13 0.18% [kND/1]
4795 4795 120 S 11 2372K 00:00:01 0.18% telnetd
5491 5491 120 S 8 1500K 00:00:00 0.18% top
2 2 115 S 0 0K 00:00:00 0.00% [kthreadd]
The system refreshes process statistics every 5 seconds. You can enter interactive commands to perform
operation as follows:
• Enter h or a question mark (?) to display help information as follows:
Help for interactive commands:
?,h Show the available interactive commands
1 Toggle SMP view: '1' single/separate states
c Sort by the CPU field(default)
d Set the delay interval between screen updates
f Sort by number of open files
k Kill a job
l Refresh the screen
m Sort by memory used
n Set the maximum number of processes to display
q Quit the interactive display
t Sort by run time of processes since last restart
< Move sort field to the next left column
> Move sort field to the next right column
Press any key to continue
• Enter d, and then enter a number to modify the refresh interval. If you enter 3, statistics are refreshed
every 3 seconds.
Enter the delay interval between updates(1~2147483647): 3
• Enter n, and then enter a number to modify the maximum number of displayed processes. If you
enter 5, statistics for five processes are displayed.
Enter the max number of processes to display(0 is unlimited): 5
87 processes; 113 threads; 735 fds
Thread states: 2 running, 111 sleeping, 0 stopped, 0 zombie
CPU states: 86.57% idle, 0.83% user, 11.74% kernel, 0.83% interrupt
Memory: 755M total, 414M available, page size 4K
JID PID PRI State FDs MEM HH:MM:SS CPU Name
864 864 120 S 24 27020K 00:00:43 8.95% syslogd
1173 1173 120 R 24 2664K 00:00:01 2.37% top
866 866 120 S 18 10276K 00:00:09 0.69% devd
1 1 120 S 16 1968K 00:00:04 0.41% scmd
881 881 120 S 8 2420K 00:00:07 0.41% diagd
• Enter f to sort processes by FDs in descending order. (You can also enter command c, m, or t to sort
processes.)
87 processes; 113 threads; 735 fds
Thread states: 1 running, 112 sleeping, 0 stopped, 0 zombie