HP MSR4080 User Manual

370
Syntax
Centralized devices in standalone mode:
display ip netstream template
Distributed devices in standalone mode/centralized devices in IRF mode:
display ip netstream template [ slot slot-number ]
Distributed devices in IRF mode:
display ip netstream template [ chassis chassis-number slot slot-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
slot slot-number: Specifies a card by its slot number. If you do not specify a card, the command displays
NetStream template information for the active MPU. (Distributed devices in standalone mode.)
slot slot-number: Specifies an IRF member device by its member ID. If you do not specify a member
device, this command displays NetStream template information for the master device. (Centralized
devices in IRF mode.)
chassis chassis-number slot slot-number: Specifies a card on an IRF member device. The chassis-number
argument represents the member ID of the IRF member device. The slot-number argument represents the
slot number of the card. If you do not specify a card, this command displays NetStream template
information for the global active MPU. (Distributed devices in IRF mode.)
Usage guidelines
IP NetStream templates vary by aggregation mode. This command displays IP NetStream template
information for all the configured aggregation modes.
Examples
# Display NetStream template information.
<Sysname> display ip netstream template
Flow template refresh frequency : 20
Flow template refresh interval : 30 min
Active flow templates : 2
Created flow templates : 2
AS outbound template:
Template ID : 3258
Packets : 0
Last template export time : Never
Field count : 14
Field type Field length (bytes)
---------------------------------------------------------------------------
Flows 4
Out packets 8

HP MSR4080 Specifications

General

Brand	HP
Model	MSR4080
Category	Network Router
Language	English