Making Connections
Connecting External Devices
Reference Guide 75
Docking the computer
The computer can be on, suspended, or off when docking.
1. Connect power to the dock—the type of connection depends on the dock. See the
manual that came with the dock.
2. Place the computer on the dock platform, with the rear of the computer facing the
dock’s docking connector. Make sure the computer’s PC Card eject buttons are in.
3. Position your fingers on the platform grips as shown below. Use your thumbs to push
the computer into the dock until the computer slides into place.
To Next Page
Loading...
Need help?
General