Switch Memory and Configuration
Multiple Configuration Files
Managing Startup-Config Files in the Switch
Command Page
rename config < current-filename > < newname-str > 6-30
copy config < source-filename > config < dest-filename > 6-30
erase config < filename > | startup-config 6-33
Erase startup-config using the front-panel Clear + Reset Buttons 6-34
Renaming an Existing Startup-Config File
Syntax: rename config < current-filename > < newname-str >
This command changes the name of an existing startup-
config file. A file name can include up to 63, alphanumeric
characters. Blanks are allowed in a file name enclosed in
quotes (“ “ or ‘ ‘). (File names are not case-sensitive.)
Creating a New Startup-Config File
The switch allows up to three startup-config files. You can create a new
startup-config file if there is an empty memory slot or if you want to replace
one startup-config file with another.
6-30
To Next Page
Loading...
