Hardware Options Installation
CAUTION: The hard drive must be installed as described in this document. If
installed incorrectly, the hard drive can be damaged.
7. With the main cage oriented as in the Figure 4-9, align the hard drive and install
into the main cage (1).
Figure 4-9: Aligning and installing the hard drive into
the main drive cage
NOTE: Be sure that the jumper on the hard drive is set to Cable Select (CS) so that the
drive device ID is determined by the hard drive cable.
IMPORTANT: Be sure the hard drive label is facing up when installed in the drive cage
assembly.
HP ProLiant BL30p Server Blade Setup and Installation Guide 4-9
To Next Page
Loading...
