Software and configuration utilities 122
Software and configuration utilities
Server mode
The software and configuration utilities presented in this section operate in online mode, offline mode, or
in both modes.
Software or configuration utility Server mode
HPE iLO (on page 122)
Active Health System (on page 123)
RESTful API support for iLO (on page 124)
Integrated Management Log (on page 124)
Intelligent Provisioning (on page 124)
HPE Insight Diagnostics (on page 125)
Erase Utility (on page 125)
Scripting Toolkit for Windows and Linux (on page 126)
Service Pack for ProLiant (on page 126)
HP Smart Update Manager (on page 126)
HPE UEFI System Utilities (on page 126)
HPE Smart Storage Administrator (on page 129)
FWUPDATE utility (on page 131)
Product QuickSpecs
For more information about product features, specifications, options, configurations, and compatibility,
see the product QuickSpecs on the Hewlett Packard Enterprise website (http://www.hpe.com/info/qs).
HPE iLO
The iLO 4 subsystem is a standard component of ProLiant servers that simplifies initial server setup,
server health monitoring, power and thermal optimization, and remote server administration. The iLO 4
subsystem includes an intelligent microprocessor, secure memory, and a dedicated network interface.
This design makes iLO 4 independent of the host server and its operating system.
iLO 4 enables and manages the Active Health System (on page 123) and also features Agentless
Management. All key internal subsystems are monitored by iLO 4. If enabled, SNMP alerts are sent
directly by iLO 4 regardless of the host operating system or even if no host operating system is installed.
Using iLO 4, you can do the following:
• Access a high-performance and secure Integrated Remote Console to the server from anywhere in
the world if you have a network connection to the server.
• Use the shared .NET Integrated Remote Console to collaborate with up to four server administrators.
• Remotely mount high-performance Virtual Media devices to the server.
• Securely and remotely control the power state of the managed server.
To Next Page
Loading...
