Hardware options installation 61
b.
Install the storage controller. Verify that the board is firmly seated in the slot.
For more information about the integrated storage controller and its features, select the relevant user
documentation on the Hewlett Packard Enterprise website
(http://www.hpe.com/info/smartstorage/docs).
9. Connect the 630-mm Mini-SAS Y-cable:
a. Connect the common end of the Mini-SAS Y-cable to the controller option.
b. Install the primary PCI riser cage ("Install the PCI riser cages" on page 27).
c. Route the Mini-SAS Y-cable along the side of the system board towards the front chassis, and
then connect the cable to the drive backplane.
To Next Page
Loading...
