10. Allow the heatsink to cool.
11. Remove the heatsink:
a. Loosen one pair of diagonally opposite screws halfway, then loosen the other pair of screws (callouts 1 and 2).
b. Completely loosen all screws in the same sequence.
c. Remove the heatsink from the processor backplate (callout 3).
12. Open the processor load plate:
a. Push the processor locking lever down to unclip it, and then pivot it to the vertical position (callout 1).
b. Open the processor load plate (callout 2).
To Next Page
Loading...
