HP ProLiant DL20 Gen10 Plus - Cabling; Cabling Guidelines; Internal Cabling Management; Storage Cabling

6.13 Fan numbering
6.14 Fan mode behavior
6.15 HPE Trusted Platform Module 2.0
6.15.1 HPE Trusted Platform Module 2.0 guidelines
6.15.2 BitLocker recovery key/password retention guidelines
7 Cabling
7.1 Cabling guidelines
7.2 Internal cabling management
7.3 Storage cabling
7.3.1 2 LFF non-hot-plug drive cabling
7.3.2 2 LFF hot-plug drive cabling
7.3.3 4 SFF hot-plug drive cabling
7.3.4 4 + 2 SFF hot-plug drive cabling
7.3.5 4 + 2 SFF hot-plug drive with tri-mode controller cabling
7.3.6 Energy pack cabling
7.3.7 Storage controller backup power cabling
7.4 Optical drive cabling
7.5 M.2 SATA SSD add-in card cabling
7.6 M.2 SSD pass-through card cabling
7.7 Fan cabling
7.8 Chassis intrusion detection switch cabling
7.9 Serial port cabling
7.10 Power supply cabling
8 Specifications
8.1 Environmental specifications
8.2 Mechanical specifications
8.3 Power supply specifications
8.3.1 ATX 290 W Non-hot-plug Power Supply (92% efficiency)
8.3.2 ATX 290 W Platinum Non-hot-plug Power Supply (94% efficiency)
8.3.3 HPE 500 W Flex Slot Platinum Hot-plug Low Halogen Power Supply (94% efficiency)
8.3.4 HPE 800 W Flex Slot -48 VDC Hot-plug Low Halogen Power Supply
9 Websites
10 Support and other resources
10.1 Accessing Hewlett Packard Enterprise Support
10.2 Accessing updates
10.3 Remote support
10.4 Warranty information
10.5 Regulatory information
10.6 Documentation feedback