Setup and Installation of the Packaged Cluster
3. Connect the VHDCI SCSI cables labeled A and B from the storage system to the
servers.
4. If you are configuring a Microsoft or Linux operating system, connect the
Ethernet crossover cable between the servers. Use the same RJ-45 connector (1),
NIC 1, on each server.
2-34 HP ProLiant DL380 Generation 3 Packaged Cluster Setup and Installation Guide
HP CONFIDENTIAL Codename: Sopwith Part Number: 252621-002 Last Saved On: 11/8/02 1:59 PM
To Next Page
Loading...
