To Next Page

To Previous Page

System Setup and Configuration for

Novell NetWare 6

IMPORTANT: Updated installation and cluster setup information is periodically released in

HP white papers. For the most recent information, go to

www.hp.com/servers/proliant/highavailability

Preconfiguration Checks

Have the following items available as you configure the cluster:

•

HP SmartStart CD 6.1 or later

NetWare 6 software and documentation

NetWare 6 Support Pack 2 or later

Novell Cluster Services (NCS) for NetWare 6 software and documentation

Before configuring the packaged cluster:

Be sure you have sufficient software rights and licenses to install the operating

system and software applications on each server.

Be sure that all hardware is installed and properly cabled.

HP ProLiant DL380 Generation 3 Packaged Cluster Setup and Installation Guide 6-1

HP CONFIDENTIAL Codename: Sopwith Part Number: 252621-002 Last Saved On: 11/8/02 3:00 PM

Questions and Answers:

Need help?

Do you have a question about the HP ProLiant DL380 G3 with MSA1000 and is the answer not in the manual?

HP ProLiant DL380 G3 with MSA1000 Specifications

General

Rack Height	2U
Hard Drive Interface	Ultra320 SCSI
Remote Management	Integrated Lights-Out (iLO)
Memory	PC2100 DDR SDRAM
Storage Controller	Smart Array 5i Plus
Network	Dual embedded NC7781 Gigabit NIC
Expansion Slots	6 PCI-X (64-bit/100 MHz)
Form Factor	Rackmount
MSA1000 Storage	External storage enclosure connected via SCSI
RAID Levels	0, 1, 5
Power Supply	Redundant Power Supply Optional
Drive Bays	6 hot-plug SCSI bays
Operating System Support	Windows Server, Linux
Processor	Intel Xeon (up to 3.6 GHz)