To Next Page

To Previous Page

System Setup and Configuration for SuSE Linux Enterprise Server 7.1

Before configuring the packaged cluster:

•

Be sure you have sufficient software rights to install the operating system and

software applications on each server node.

Be sure all hardware is installed and properly cabled.

NOTE: For additional information on installing and configuring Linux and LifeKeeper on a

ProLiant server, please refer to the following websites:

•

HP high availability—www.hp.com/servers/proliant/highavailability

•

HP Linux solutions—www.hp.com/linux

•

Linux for ProLiant—www.hp.com/products/servers/linux

•

LifeKeeper for Linux documentation—

http://licensing.steeleye.com/support/docm.php

•

Obtaining LifeKeeper for Linux license key—

http://licensing.steeleye.com/download/index.php

•

Linux—www.linux.org

•

SuSE—www.suse.com

•

RPM Package Manager (RPM)—www.rpm.org

8-2 HP ProLiant DL380 Generation 3 Packaged Cluster Setup and Installation Guide

HP CONFIDENTIAL Codename: Sopwith Part Number: 252621-002 Last Saved On: 11/8/02 3:08 PM

Questions and Answers:

Need help?

Do you have a question about the HP ProLiant DL380 G3 with MSA1000 and is the answer not in the manual?

HP ProLiant DL380 G3 with MSA1000 Specifications

General

Rack Height	2U
Hard Drive Interface	Ultra320 SCSI
Remote Management	Integrated Lights-Out (iLO)
Memory	PC2100 DDR SDRAM
Storage Controller	Smart Array 5i Plus
Network	Dual embedded NC7781 Gigabit NIC
Expansion Slots	6 PCI-X (64-bit/100 MHz)
Form Factor	Rackmount
MSA1000 Storage	External storage enclosure connected via SCSI
RAID Levels	0, 1, 5
Power Supply	Redundant Power Supply Optional
Drive Bays	6 hot-plug SCSI bays
Operating System Support	Windows Server, Linux
Processor	Intel Xeon (up to 3.6 GHz)