HP ProLiant DL580 Gen9 - Specifications; Environmental Specifications; Mechanical Specifications; Power Supply Specifications

Specifications 100
Specifications
Environmental specifications
Specification
Value
Temperature range*
Operating
10°C to 35°C (50°F to 95°F)
Shipping
-40°C to 70°C (-40°F to 158°F)
Maximum wet bulb temperature
28°C (82.4°F)
Relative humidity
(noncondensing)**
Operating
10% to 90%
Nonoperating
5% to 95%
* All temperature ratings shown are for sea level. An altitude derating of 1°C per 300 m (1.8°F per 1,000 ft) to 3,048 m
(10,000 ft) is applicable. No direct sunlight allowed.
** Storage maximum humidity of 95% is based on a maximum temperature of 45°C (113°F). Altitude maximum for
storage corresponds to a pressure minimum of 70 kPa.
Mechanical specifications
Specification Value
Height
17.5 cm (6.88 in)
Depth
73.6 cm (29 in)
Width
44.4 cm (17.48 in)
Weight (maximum)
52 kg (115 lb)
Weight (no drives installed)
33 kg (73 lb)
Power supply specifications
Depending on installed options, the server is configured with one of the following power supplies:
• HPE 1200 W Common Slot Platinum Plus Hot-Plug Power Supply (94% efficiency) (on page 100)
• HPE 1500 W Common Slot -48 VDC Hot-plug Power Supply (on page 101)
• HPE 1500 W Common Slot Platinum Plus Hot-Plug Power Supply (94% efficiency) (on page 102)
• For detailed power supply specifications, see the server QuickSpecs on the Hewlett Packard
Enterprise website (http://www.hpe.com/info/qs).
HPE 1200 W Common Slot Platinum Plus Hot-Plug Power
Supply (94% efficiency)
Specification Value
Input requirements
Rated input voltage
100 VAC,100 to 120 VAC