Removal and replacement procedures 27
2.
Extend the server on the rack rails until the server rail-release latches engage.
3. After performing the installation or maintenance procedure, slide the server into the rack by pressing
the server rail-release latches.
Remove the server from the rack
WARNING:
To reduce the risk of personal injury or equipment damage, be sure that the rack
is adequately stabilized before extending a component from the rack.
WARNING: To reduce the risk of personal injury, be careful when pressing the server
rail-release latches and sliding the server into the rack. The sliding rails could pinch your
fingers.
32.18-52.87 kg
70.94-116.56 lb
This symbol indicates that the component exceeds the recommended weight for one
individual to handle safely.
WARNING: To reduce the risk of personal injury or damage to the equipment,
observe local occupational health and safety requirements and guidelines for manual
material handling.
To Next Page
Loading...
