EasyManuals Logo

HP ProLiant MicroServer Gen8 Maintenance And Service Guide

HP ProLiant MicroServer Gen8
88 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #22 background imageLoading...
Page #22 background image
Removal and replacement procedures 22
Removal and replacement procedures
Required tools
You need the following items for some procedures:
T-10/T-15 Torx screwdriver (on page 75)
HP Insight Diagnostics (on page 64)
Safety considerations
Before performing service procedures, review all the safety information.
Preventing electrostatic discharge
To prevent damaging the system, be aware of the precautions you need to follow when setting up the system
or handling parts. A discharge of static electricity from a finger or other conductor may damage system
boards or other static-sensitive devices. This type of damage may reduce the life expectancy of the device.
To prevent electrostatic damage:
Avoid hand contact by transporting and storing products in static-safe containers.
Keep electrostatic-sensitive parts in their containers until they arrive at static-free workstations.
Place parts on a grounded surface before removing them from their containers.
Avoid touching pins, leads, or circuitry.
Always be properly grounded when touching a static-sensitive component or assembly.
Symbols on equipment
The following symbols may be placed on equipment to indicate the presence of potentially hazardous
conditions.
This symbol indicates the presence of hazardous energy circuits or electric shock
hazards. Refer all servicing to qualified personnel.
WARNING: To reduce the risk of injury from electric shock hazards, do not open this
enclosure. Refer all maintenance, upgrades, and servicing to qualified personnel.
This symbol indicates the presence of electric shock hazards. The area contains no user
or field serviceable parts. Do not open for any reason.
WARNING: To reduce the risk of injury from electric shock hazards, do not open this
enclosure.

Table of Contents

Other manuals for HP ProLiant MicroServer Gen8

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP ProLiant MicroServer Gen8 and is the answer not in the manual?

HP ProLiant MicroServer Gen8 Specifications

General IconGeneral
Tcase65.3 °C
Bus typeDMI
FSB ParityNo
Processor cache3 MB
Processor cores2
Processor modeli3-3240
System bus rate5 GT/s
Processor familyIntel® Core™ i3
Processor seriesIntel Core i3-3200 Desktop Series
Processor threads4
Processor codenameIvy Bridge
Motherboard chipsetIntel® C204
Processor frequency3.4 GHz
Processor cache typeSmart Cache
Processor lithography22 nm
Processor manufacturerIntel
Processor package size37.5 x 37.5 mm
Processor front side bus- MHz
Processor operating modes64-bit
PCI Express configurations1x16, 2x8
Supported instruction setsAVX, SSE4.1, SSE4.2
Thermal Design Power (TDP)55 W
Supported processor socketsLGA 1155 (Socket H2)
Number of processors installed1
Thermal solution specificationPCG 2011C
CPU multiplier (bus/core ratio)34
Thermal Monitoring TechnologiesYes
Memory types supported by processorDDR3-SDRAM
Memory channels supported by processorDual
Memory clock speeds supported by processor1333, 1600 MHz
Memory bandwidth supported by processor (max)25.6 GB/s
Maximum internal memory supported by processor32 GB
HDD size3.5 \
RAID levels0, 1, 10
HDD interfaceSerial ATA
Optical drive typeDVD±RW
Total storage capacity1000 GB
Maximum storage capacity12 TB
Memory slots2x DIMM
Internal memory4 GB
Memory clock speed1600 MHz
Maximum internal memory16 GB
Memory layout (slots x size)1 x 4 GB
On-board graphics card ID0x152
On-board graphics card modelIntel® HD Graphics 2500
On-board graphics card familyIntel® HD Graphics
On-board graphics card base frequency650 MHz
On-board graphics card dynamic frequency (max)1050 MHz
Number of displays supported (on-board graphics)3
Cabling technology10/100/1000Base-T(X)
Ethernet interface typeGigabit Ethernet
Power supply200 W
Chassis typeUltra Micro Tower
Serial ports quantity0
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
PCI Express slots version2.0
Operating system installed-
Compatible operating systemsMicrosoft Windows Server Red Hat Enterprise Linux SUSE Linux Enterprise Server VMware
Processor ARK ID65690
Intel Secure Key Technology version0.00
Intel Identity Protection Technology version1.00
Weight and Dimensions IconWeight and Dimensions
Depth245 mm
Width230 mm
Height232.4 mm
Weight9800 g

Related product manuals