The iLO management port is connected to a secure network.
b. Using a browser, navigate to the iLO web interface, and then log in.
Note the following:
The iLO hostname is on the serial number/ iLO information label on the top side of the chassis .
If a DHCP server assigns the IP address, the IP address appears on the boot screen.
If a static IP address is assigned, use that IP address.
The default login credentials are on the serial number/ iLO information label on the top side of the chassis .
c. Enter the iLO login name and password, and then click Log In.
d. In the navigation tree, click the Remote Console & Media link, and then launch a remote console.
6. Configure the initial setup of a server.
7. Set up the storage .
8. Deploy an OS or virtualization software.
9. After the OS is installed, update the drivers.
10. To experience quick service and efficient support, register the server at the HPE website:
https://myenterpriselicense.hpe.comhttps://myenterpriselicense.hpe.com
https://<iLO hostname or IP address>
To Next Page
Loading...
