HP PROLIANT ML330 G6 User Manual

Specifications 121
Power supply specifications
Depending on installed options, the server is configured with one of the following power supplies:
• HP ProLiant 750 W Power Supply
Specification Value
Input requirements
Rated input voltage
100 to 120 VAC, 200 to
240 VAC
Rated input frequency 50 Hz to 60 Hz
Rated input current 9.4 A at 100 VAC
4.7 A at 200 VAC
Rated input power 857 W at 100V AC input
852 W at 200V AC input
BTUs per hour 2924 at 100V AC input
2907 at 200V AC input
Power supply output
Rated steady-state power
750 W at 100V to 120V AC
input
750 W at 200V to 240V AC
input
Maximum peak power
750 W at 100V to 120V AC
input
750 W at 200V to 240V AC
input
• HP ProLiant 460 W Power Supply
Specification Value
Input requirements
Rated input voltage
100 to 120 VAC, 200 to
240 VAC
Rated input frequency 50 Hz to 60 Hz
Rated input current 10.0 A at 100 VAC
5.0 A at 200 VAC
Rated input power 626 W at 100V AC input
676 W at 200V AC input
BTUs per hour 2306 at 100V AC input
2306 at 200V AC input
Power supply output
Rated steady-state power
460 W at 100V to 120V AC
input
460 W at 200V to 240V AC
input

HP PROLIANT ML330 G6 Specifications

General

Form Factor	Tower
Product Type	Server
Processor Sockets	2
Memory Slots	6
Network	Gigabit Ethernet
Processor	Intel Xeon 5500 series
Memory Type	DDR3
Hard Drive Interface	SATA, SAS
Expansion Slots	6
Operating System Support	Microsoft Windows Server, VMware