HP PROLIANT ML330 G6 User Manual

Hardware options installation 52
12.
Install the access panel (on page 22).
13. Do one of the following:
o Close or install the tower bezel, as needed.
o Slide the server back into the rack.
14. Power up the server (on page 20).
SAS or SATA hard drive option
CAUTION: For proper cooling, do not operate the server without the access panel, baffles,
expansion slot covers, hard drives, or blanks installed.
To install the component:
1. Remove the hard drive blank.
2. Prepare the drive for installation.

HP PROLIANT ML330 G6 Specifications

General

Form Factor	Tower
Product Type	Server
Processor Sockets	2
Memory Slots	6
Network	Gigabit Ethernet
Processor	Intel Xeon 5500 series
Memory Type	DDR3
Hard Drive Interface	SATA, SAS
Expansion Slots	6
Operating System Support	Microsoft Windows Server, VMware