Control-panel layout
The control panel includes a touch screen graphical display, job-control buttons, a keyboard, and three light-
emitting diode (LED) status lights.
1 Touch screen Use the touch screen to access product functions.
2
Touch screen brightness-
adjustment control
Use this control to increase or decrease the brightness of the touch screen display.
3
Reset button Resets the job settings to factory or user-defined default values.
4
Ready LED The Ready LED indicates that the product is ready to begin processing any job.
5
Data LED The Data LED indicates that the product is receiving data.
6
Attention LED The Attention LED indicates that the product has a condition that requires
intervention.
7
Start button Starts digital sending (e-mail and fax, for example), or continues a job that has
been interrupted.
8
Stop button Stops the active job and opens the Job Status screen.
9
Sleep button If the product is inactive for a long period of time, it automatically enters a sleep
mode. To place the product into sleep mode or to reactivate the product, press
the Sleep button.
10 Chapter 2 Control panel ENWW
To Next Page
Loading...