EasyManua.ls Logo

HP ScanJet Enterprise 8500 fn1 - Supported Network Protocols

HP ScanJet Enterprise 8500 fn1
146 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Supported network protocols
The product supports the TCP/IP network protocol, the most widely used and accepted networking protocol.
Many networking services utilize this protocol. The following tables list the supported networking services and
protocols.
Table 3-1 Network device discovery
Service name Description
SLP (Service Location Protocol) Device-discovery protocol, used to help find and configure network
devices. Used primarily by Microsoft-based programs.
Table 3-2 Messaging and management
Service name Description
HTTP (Hyper Text Transfer Protocol) Allows Web browsers to communicate with the Embedded Web
Server.
EWS (Embedded Web Server) Allows you to manage the product through a Web browser.
SNMP (Simple Network Management Protocol) Used by network applications for product management. SNMP v1,
SNMP v3, and standard MIB-II (Management Information Base)
objects are supported.
LLMNR (Link Local Multicast Name Resolution) Specifies if the product responds to LLMNR requests over IPv4 and
IPv6.
TFTP Configuration Use TFTP to download a configuration file containing additional
configuration parameters, such as SNMP or non-default settings,
for Jetdirect Inside (JDI).
Table 3-3 IP addressing
Service name Description
DHCP (Dynamic Host Configuration Protocol) For automatic IPv4 and IPv6 address assignment. The DHCP server
provides the product with an IP address. Generally, no user
intervention is required for the product to obtain an IP address from
a DHCP server.
BOOTP (Bootstrap Protocol) For automatic IP address assignment. The BOOTP server provides
the product with an IP address. Requires the administrator to input
a product's MAC hardware address on the BOOTP server for the
product to obtain an IP address from that server.
Auto IP For automatic IP address assignment. If neither a DHCP server nor
a BOOTP server is present, the product uses this service to generate
a unique IP address.
Manual For manual IP address assignment. Requires the administrator to
manually assign a static IP address.
ENWW Supported network protocols 19

Table of Contents

Related product manuals