5. On the first screen of the quick set wizard, supply a title and description for the scan-to-SharePoint quick
set, select the button location for the quick set and options for user interaction at the control panel, and
then click Next.
6. On the SharePoint Destination Settings dialog, click Add to create a scan-to-SharePoint destination, and
then follow the instructions at the top of the SharePoint Destination Settings dialog.
a. Using your browser, navigate to the SharePoint scan destination folder, copy the destination path,
paste the path into the SharePoint Path field on the Add SharePoint Path dialog, and complete the
remainder of the dialog fields as desired.
NOTE: If you select Use credentials of user to connect after Sign In at the control panel in the
Authentication Settings drop-down list, the logged-in user must have permissions to write to the
specified SharePoint site.
●
Make sure to provide a fully-qualified domain name in the Windows Domain field (this field is
case-sensitive).
●
Make sure to select Generate Short URL to remove extraneous characters from the path name.
b. When you have finished defining the SharePoint settings, click OK, and then click Next.
c. Complete the remainder of the Quick Set Wizard dialogs as appropriate, clicking Next to progress to
the next dialog.
d. When you reach the Summary dialog, click Finish to complete setup.
Once you have created a save-to-SharePoint quick set, you can scan to the SharePoint destination using the
quick set either directly from the Home screen or from the Quick Sets button on the Home screen.
Configure USB storage device settings
1. Open the Embedded Web Server.
2. Click the Scan/Digital Send tab.
3. On the left navigation menu, click the Save to USB Setup entry.
4. Select the Enable Save to USB checkbox.
5. Set the default settings you want.
6. Click the Apply button.
Configure Quick Sets
1. Open the Embedded Web Server.
2. Click the General tab.
3. On the left navigation menu, click the Quick Sets Setup entry.
4. Click the Add button, and then follow the onscreen instructions in the Quick Set Wizard.
5. When you are done, click the Apply button.
TIP: You can also configure Quick Sets on other setup pages in the Embedded Web Server.
34 Chapter 3 Administration - Configure the product ENWW
To Next Page
Loading...