Replace the rollers
Replace the rollers under the following conditions:
●
When the message Document Feeder Kit Low displays in the status line on the Home screen (a warning
button displays to the right of the status line).
●
If you experience repeated document jams and cleaning the rollers did not help.
TIP: An animation which guides you through removing and replacing the rollers is available on the web (see
www.hp.com/support, and search on your product).
The roller replacement kit includes a replacement separation pad. Make sure to replace the separation pad
when you replace the rollers. To order the replacement kit, see
www.hp.com/buy/parts.
NOTE: The roller replacement kit is a consumable and is not covered under warranty or standard service
agreements.
To replace the rollers, follow these steps:
1. Press the Power button to turn off the product, and then disconnect the power cable.
2. Open the automatic document feeder (ADF) hatch.
80 Chapter 8 Replace and install components ENWW
To Next Page
Loading...