7. Wipe the two scanning strips (one black, one white) on the ADF duplex background (1) and the strip inside
the ADF duplex background enclosure (2) with a soft, lint-free cloth that has been moistened with warm
water.
8. Dry the scanning strips with a dry, soft, lint-free cloth, and then slide the component into its housing until
both tabs click into place.
9. Lower the scan input tray into place, and then reconnect the power supply to the product.
10. Press the Power button to turn on the product.
ENWW Clean the scanning glass, scanning strip, and automatic document feeder (ADF) duplex background 75
To Next Page
Loading...