HP StoreOnce 3100 System Installation And Configuration Guide

2. In the Modify SNMP Agent window, modify the configuration of the SNMP Agent as desired,
and click OK.
Table 10 SNMP Agent configuration parameters
DescriptionName
This is the description for the StoreOnce system configured
for the agent.
System description
This is the SNMP version of the agent (version 1, 2, or 3).
The default is 2.
SNMP version
This shows the state of the agent (off, on).State
This is the port location of the agent.Port
This defines whether encryption for passwords and
communities is on or off.
Encrypt Passwords and Communities
This is the contact information for the system administrator,
which may be a name, email address, or phone number.
A maximum of 20 characters is allowed.
System Contact
This is the physical location of the StoreOnce appliance.
A maximum of 20 characters is allowed.
System Location
Configuring SNMP on the StoreOnce Management Console 35

HP StoreOnce 3100 Specifications

General

Brand	HP
Model	StoreOnce 3100
Category	Storage
Language	English