Table 10 SNMP Agent configuration parameters (continued)
DescriptionName
This defines the SNMP Read Community string. The default
is public. If you want to restrict read access, enter a string
Read Community
of up to 20 characters. This string acts as a password for
Read access and must be manually configured in the
management application so that it can access events.
The SNMP agent unique System Object ID. SNMP agents
(running on a StoreOnce Device) supporting
System Object ID
HP-httpManageable-MIB must provide a unique System
Object ID. This ID is used by network management entities
to determine the monitoring capabilities of a device.
This optional device-specific parameter can be provided
to an SNMP version 3 trap listener device such as HP SIM
Engine ID
(or any third party tool) to listen to version 3 traps coming
from the device.
This optional parameter can be provided during version 3
configuration. If the value is yes, versions 1 and 2 are
Allow non-V3 read requests
supported along with version 3. If the value is no, only
version 3 is supported. If this parameter is not configured,
only version 3 will be supported.
36 Setting up SNMP (Simple Network Management Protocol)
To Next Page
Loading...
Need help?
General