To Next Page

To Previous Page

Select the type of configuration for this subnet

(Selecting "bonded" here will create a "portset" consisting of two separate NICs bonded together) :

1 = Single port (default)

2 = Bonded ports (note ports must be the same speed to bond)

-->1

<--Bonded/Single: Single port

Select network adapter :

1 = eth0 (1 Gig) (default)

2 = eth1 (1 Gig)

3 = eth2 (1 Gig)

4 = eth3 (1 Gig)

5 = eth4 (10 Gig)

6 = eth5 (10 Gig)

-->1

<--Single Port: eth0 (1 Gig)

---------------------------------------------------

The next question has a mandatory response, since

this is a single-node system.

---------------------------------------------------

What type of data will this network carry?

1 = both (default)

-->1

<--Data/Management/Both: both

Is this subnet on a Virtual LAN?

1 = No (default)

2 = Yes

-->1

<--VLAN/Not VLAN: No

Select Static or DHCP addressing :

1 = DHCP (default)

2 = Static

-->1

<--DHCP/Static: DHCP

Do you want to configure a static default gateway for this subnet or get the gateway information from

DHCP?

1 = Gateway obtained from DHCP server (default)

2 = Set gateway manually (this may be blank if no gateway is required)

-->1

<--Gateway: Gateway obtained from DHCP server

Do you want to configure the network domain name or get the domain name from DHCP?

1 = Domain name obtained from DHCP server (default)

2 = Set domain name manually (e.g. mydomain.local - this may be blank if no domain name is required)

-->1

<--Domain Name: Domain name obtained from DHCP server

----------------------

Network: subnet_1

----------------------

IP Addresses: dhcp

Net Mask: dhcp

Domain Name: dhcp

Gateway: dhcp

VLAN tag:

Port Set: portset_1 with these interfaces: eth0

Encryption Links:

Bonding Mode: Not applicable

Is this configuration correct?

1 = Yes (default)

2 = No

-->1

<--Configuration okay: Yes

-------------------------------------------------------------

If you have added all subnets, then you may proceed: you will

then be shown a summary of the configuration and be given the

option to validate it, and then a further option to apply it.

Otherwise, you may continue to add further subnets.

-------------------------------------------------------------

Do you want to configure another subnet?

50 Network configuration, how to use StoreOnce CLI commands

Brand	HP
Model	StoreOnce 4900 Backup
Category	Storage
Language	English

HP StoreOnce 4900 Backup User Manual

Table of Contents

Questions and Answers:

HP StoreOnce 4900 Backup Specifications

Related product manuals