HP ZBOOK STUDIO 16 G10 User Manual

Table 5-3 Bottom speakers description and part number
Description Spare part number
Bottom speakers (included in the Speaker Kit, spare part number N51007-001; includes left and right top speakers, left and right
bottom speakers, cables, and 4 rubber isolators)
Before removing the bottom speakers, follow these steps:
1. Prepare the computer for disassembly (see Preparation for disassembly on page 40).
2. Remove the bottom cover (see Bottom cover on page 40).
Remove the bottom speakers:
1. Disconnect the battery cable from the system board.
2. Disconnect the bottom speaker cables (1) from the system board.
3. Remove the four Phillips M2.0 × 2.4 broadhead screws (2) that secure the bottom speakers to the
computer.
4. Remove the bottom speakers (3) from the computer.
When removing the bottom speakers, make note of the location of the four rubber isolator
locations (4). The absence of or damage to these isolators can result in degraded speaker
performance.
Bottom speakers
45

HP ZBOOK STUDIO 16 G10 Specifications

General

Operating System	Windows 11 Pro
Wireless	Wi-Fi 6E, Bluetooth 5.3
Webcam	5MP IR Camera
Audio	Bang & Olufsen, dual speakers
Keyboard	Backlit, spill-resistant
Processor	Intel Core i7 or i9 (13th Gen)
Graphics	NVIDIA RTX 2000 Ada Generation Laptop GPU
Display	16-inch, 2560 x 1600, IPS
RAM	Up to 64GB DDR5
Storage	Up to 2TB PCIe NVMe SSD
Weight	1.73 kg
Battery	86 Wh Li-ion polymer
Ports	2 x Thunderbolt 4, 1 x HDMI 2.1, 1 x headphone/microphone combo
Security	Fingerprint sensor, TPM 2.0