8. Remove the display assembly (3) from the computer.
9. To remove the display bezel or any of the internal display components, follow these steps.
a. Remove the display assembly.
b. Use a thin, non-conductive tool (1) to separate the left side of the hinge cover (2) from the
display assembly.
c. Remove the hinge cover (3).
The hinge cover is available using spare part number N10937-001.
d. Use a thin, non-conductive tool to separate the bottom edge (1) of the display bezel from the
display back cover.
e. Separate the left (2) and right edges of the display bezel from the display back cover.
f. Separate the top edge (3) of the display bezel from the display back cover.
g. Remove the display bezel (4).
The display bezel is available using spare part number N10930-001.
Display assembly
53
To Next Page
Loading...
