6. Optional: To add vCenter, Click Add vCenter.
a. Enter the vCenter name, vCenter hostname or IP address, port number, and user credentials for
specified vCenter.
NOTE: The vCenter name can be up to 32 characters and can contain only alphabets (A-Z, a-z),
numbers (0-9), and special characters underscore (_) and hyphen (-). vCenter name cannot have
any other special characters.
IMPORTANT: If you are using SP 4.4 MU7, do not provide vCenter name as vCenter.
Optional: You can add description of the vCenter.
NOTE: The description of the vCenter can be up to 120 characters.
b. Do one of the following:
• Add—The vCenter is added and the details are displayed on the StoreServ page.
• Add+—The current vCentre is added and you can proceed with adding another vCenter.
• Cancel—The vCenter addition task is cancelled.
36 StoreServ Configuration Management
To Next Page
Loading...
