HPE FlexNetwork MSR958

106
ntp-service authentication enable
Use ntp-service authentication enableto enable NTP authentication.
Use undo ntp-service authentication enableto disable NTP authentication.
Syntax
ntp-service authentication enable
undo ntp-service authentication enable
Default
NTP authentication is disabled.
Views
System view
Predefined user roles
network-admin
Usage guidelines
Enable NTP authentication in networks that require time synchronization security to make sure NTP
clients are synchronized only to authenticated NTP servers.
To authenticate an NTP server, set an authentication key and specify it as a trusted key.
Examples
# Enable NTP authentication.
<Sysname> system-view
[Sysname] ntp-service authentication enable
Related commands
ntp-service authentication-keyid
ntp-service reliable authentication-keyid
ntp-service authentication-keyid
Use ntp-service authentication-keyid to set an NTP authentication key.
Use undo ntp-service authentication-keyid to remove an NTP authentication key.
Syntax
ntp-service authentication-keyidkeyidauthentication-mode md5{ cipher | simple } string
undo ntp-service authentication-keyidkeyed
Default
No NTP authentication key is set.