HPE FlexNetwork MSR958

502
info-center logfile directory
reset logbuffer
Use reset logbuffer to clear the log buffer.
Syntax
reset logbuffer
Views
User view
Predefined user roles
network-admin
Examples
# Clear the log buffer.
<Sysname> reset logbuffer
Related commands
display logbuffer
security-logfile save
Use security-logfile save to manually save security logs from the security log file buffer to the
security log file.
Syntax
security-logfile save
Views
Any view
Predefined user roles
security-audit
Usage guidelines
The system clears the security log file buffer after saving the buffered security logs to the security log
file automatically or manually.
If the security log file buffer is empty, this command displays a success message event though no
security logs are saved to the security log file.
A local user can use this command only after being authorized as the security log administrator by
the system administrator. For more information about the security log administrator, see Security
Configuration Guide.